Commercial energy audit data: audit & analysis

You use the Nebatic system for a limited period to measure and analyse your building. With the results you decide on the next steps, and depending on your needs you continue using Nebatic afterwards or not.

Frequently asked questions

BACS compliance checklist: what should owners check before 2029?

A simple BACS compliance checklist starts with three questions: is it a non-residential building, which heating, air-conditioning or combined ventilation systems does it have, and is their rated output above 70 kW? Then check whether documentation is complete and whether existing systems can monitor and analyse energy use, detect efficiency losses, communicate across manufacturers and monitor indoor climate. A time-limited Nebatic measurement shows which data already exist and where gaps are; legal assessment stays with your consultants (not legal advice).

What does a commercial energy audit involve?

A commercial energy audit analyses where and how a building or company uses energy and recommends measures; in Europe it is usually carried out to EN 16247-1. In Germany, companies that are not SMEs must have one every four years unless they run an ISO 50001 energy management system or EMAS. A good audit relies on measured operating data rather than estimates. Nebatic measures energy and indoor climate over an agreed period and supplies that data; it does not replace the audit itself (not legal advice).