EPBD duty: indoor climate monitoring for building automation

The building automation duty under § 56 GModG requires continuous recording of energy and indoor climate. Nebatic makes indoor climate visible room by room.

Under § 56 of the German Building Modernisation Act (GModG, formerly § 71a GEG), non-residential buildings with heating or air conditioning above 70 kW must have building automation; existing buildings have until the end of 2029. Nebatic provides the indoor climate data as one building block of your automation and monitoring concept.

How it works with Nebatic

Nebatic records temperature, humidity, CO₂ and more room by room and provides them on the platform as trends and issues. Through APIs the data can be connected to existing building systems and consumption data. Indoor climate thus becomes a traceable building block of your automation and monitoring concept.

Basis: § 56 of the German Building Modernisation Act (GModG). The duty does not apply where the equipment is technically impossible or economically unreasonable. Not legal advice: a general summary (as of October 2026).

Source: § 56 GModG on gesetze-im-internet.de (German)

Part of the solution Devices & platform

Frequently asked questions

Section 56 GModG: which buildings does the GModG require to have building automation?

Under Section 56 GModG, non-residential buildings whose heating, air-conditioning or combined ventilation system has a rated output above 70 kW must be equipped with a building automation and control system. This brings many mid-sized office, school and administrative buildings into scope. Exceptions apply where it is technically impossible or economically unreasonable. General information, not legal advice (as of October 2026).

Since when has the Building Modernisation Act required building automation from 70 kW?

Previously, the duty under Section 71a GEG only applied from 290 kW. With the reform, the Building Modernisation Act requires building automation for non-residential buildings with systems above 70 kW rated output. Automatic lighting control is also required for such buildings. Nebatic supplies the indoor climate data needed to plan and review automation sensibly.

What deadline does the Building Modernisation Act set for non-residential buildings?

The Building Modernisation Act gives non-residential buildings with heating or air-conditioning systems above 70 kW until 31 December 2029. By then a building automation and control system must be in place unless an exception applies. Starting with a measurement now leaves enough time to clarify needs and solution properly.

Building automation duty (70 kW): which systems count?

For the 70 kW threshold, the rated output of the heating system, combined heating and ventilation system, air-conditioning system or combined air-conditioning and ventilation system is what matters. How to determine the output for your building is best clarified with your engineer or energy consultant. Nebatic can integrate existing system and meter data to support the inventory.

Building automation duty – existing buildings: what applies?

Existing non-residential buildings with systems above 70 kW must be retrofitted by the end of 2029. New buildings also face requirements on the automation grade. For existing buildings, measuring the current state is a good first step: Nebatic shows how rooms are actually heated, ventilated and used today.

Building automation duty: 2029 deadline – is there still enough time?

The deadline is 31 December 2029. Planning, tendering and installation take time, especially when several buildings are affected. With Nebatic you measure beforehand where automation brings the most and have solid data for planning.

Building automation duty: which non-residential buildings are affected?

The duty covers buildings such as offices, schools, administrative buildings or hotels if their heating or air-conditioning system exceeds 70 kW rated output. Residential buildings are not covered by this rule. Nebatic helps operators record the current indoor climate and usage of each building.

GEG Section 71a building automation: what did Section 71a GEG require?

The old rule in Section 71a GEG covered non-residential buildings with systems above 290 kW, with a deadline at the end of 2024. This duty has been absorbed into the Building Modernisation Act, which lowered the threshold to 70 kW.

GEG building automation duty: 290 kW or 70 kW – which applies today?

The former GEG duty has been replaced by Section 56 GModG. Instead of the previous 290 kW threshold, the limit is now 70 kW. Anyone previously below the old threshold should check again whether their building is affected.

Is indoor climate monitoring mandatory for non-residential buildings?

Whether indoor climate monitoring is mandatory for your building is not a blanket rule; it follows from the requirements on the building automation and control system and other rules for your use. Either way it is an important building block: only room data show whether automation really balances comfort and energy. Nebatic measures CO₂, temperature, humidity, VOC, particulate matter, light and noise and shows trends, issues and hints on the platform.

BACS requirements: what must a building automation system be able to do?

Under Article 13(10) of the EPBD, BACS requirements include continuously monitoring, logging and analysing energy use, benchmarking efficiency and detecting losses, and communicating with technical building systems across manufacturers. By 29 May 2026, systems must also be able to monitor indoor environmental quality. That last point is where Nebatic fits: it records temperature, humidity, CO₂ and more room by room and makes the data available on the platform and through APIs. General information, not legal advice (as of October 2026).

BACS requirements non-residential buildings: which thresholds and deadlines apply?

The EPBD sets BACS requirements for non-residential buildings in two stages: buildings with heating, air-conditioning or combined ventilation systems above 290 kW by 31 December 2024, and above 70 kW by 31 December 2029, where technically and economically feasible. In Germany, Section 56 GModG sets the 70 kW deadline at the end of 2029. Automatic lighting controls are added for these buildings. Nebatic supplies the indoor climate data needed to plan and review automation. General information, not legal advice (as of October 2026).

What does EPBD Article 13 mean for building owners?

EPBD Article 13 of the recast Energy Performance of Buildings Directive (EU) 2024/1275 requires member states to make building automation and control systems mandatory in larger non-residential buildings and lists what these systems must be able to do, including monitoring indoor environmental quality. Owners are bound by the national law that implements it, in Germany Section 56 GModG. Before tendering, it is worth knowing how rooms actually perform: Nebatic provides room-by-room indoor climate data as one building block of the automation and monitoring concept. General information, not legal advice (as of October 2026).

Germany Building Modernisation Act GModG: what changed for building automation?

In 2026, Germany renamed the Buildings Energy Act (GEG) as the Building Modernisation Act (GModG). The former Section 71a GEG, which required building automation only above 290 kW, was repealed with effect from 29 July 2026; the rule now sits in Section 56 GModG. It applies to non-residential buildings with heating or air-conditioning systems above 70 kW, with a deadline of 31 December 2029 for existing buildings. Nebatic provides indoor climate data for the planning. General information, not legal advice (as of October 2026).

Building automation 70 kW threshold: how do you check whether your building is above it?

The building automation 70 kW threshold refers to the rated output of the heating system, combined heating and ventilation system, air-conditioning system or combined air-conditioning and ventilation system. The figures are usually found in plant documentation; how to determine them for your building is best clarified with your building services engineer or energy consultant. Nebatic can integrate existing system and meter data and add room-by-room indoor climate data, which supports the inventory. General information, not legal advice (as of October 2026).

Building automation requirement Germany: what does it mean for international owners?

Owners with non-residential buildings in Germany must follow Section 56 GModG, the German implementation of the EU building automation rules: systems above 70 kW need a building automation and control system by 31 December 2029, unless it is technically impossible or economically unreasonable. Other EU countries implement the directive in their own laws, so portfolios across borders face different details. Nebatic records indoor climate per room and makes the data available through APIs, regardless of the country. General information, not legal advice (as of October 2026).

What are building automation and control systems, and what must they do?

Building automation and control systems (BACS) is the EU umbrella term for systems that control and monitor technical building systems such as heating, ventilation and air conditioning. Under Article 13 of the EPBD they must, among other things, continuously monitor and analyse energy use, detect efficiency losses and communicate with systems from different manufacturers; monitoring indoor environmental quality is part of the list. In Germany, Section 56 GModG requires them for non-residential buildings above 70 kW by 31 December 2029. Nebatic is not such a system, but supplies room-by-room indoor climate data for it. General information, not legal advice (as of October 2026).